Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Dania Beach
Gate repair in Dania Beach typically runs $150 – $450 for most common fixes, with sliding gate work and wrought iron restoration landing in the $250 – $800 range depending on corrosion damage and post condition. We reach Dania Beach homes the same day in most cases, and every quote is agreed before we touch a single bolt. If your gate is sagging, grinding, or refusing to open, call (866) 665-5592 and we’ll get it sorted.
Carter Gate Repair works the full length of 33004, from the older single-family streets east of US-1 to the canal-side lanes near the Dania Cut-off. We know this town’s gates: the mid-century chain-link driveway enclosures, the salt-pitted wrought iron, the pool-cage gates that bind after a squall. This isn’t a side trade for us. We’re Gate Repair specialists, and we work on the gate you already have rather than selling you one you don’t need.
Why Carter Gate Repair Is Dania Beach’s Preferred Gate Repair Company
Homeowners and property managers in Dania Beach call us for one reason that keeps repeating: we know why gates fail here. Salt air, sandy soil, and fifty-year-old post footings create a repair profile you won’t find ten miles west. Our technicians have worked gates on nearly every block pattern in 33004, and that local repetition means faster diagnosis and fewer return trips.
We’re the team neighbors recommend when a gate post leans after heavy rain or a legacy operator starts cycling on its own. We service LiftMaster, FAAC, Elite, and Mighty Mule systems among others, and our brand-agnostic approach means we fix what’s broken instead of steering you toward a replacement that pads an invoice. From the control board to the hinge, we handle the whole system. And because we’re based just up the road in Hollywood, our response time to Dania Beach is measured in minutes on most days, not hours.
Styles & brands we work with
Sliding Gate Repair in Dania Beach
Sliding Gate Repair in Dania Beach usually starts with a track survey: years of salt-laden onshore breezes and blowing sand leave steel tracks pitted, rollers bound up, and cantilever mechanisms grinding against corroded guides. On canal-side properties near the Dania Cut-off, we also find that saturated sandy soil has shifted the gate frame out of square, so the first step is often re-setting the end posts before the slide can run true again.
Track, Roller, and Bearing Work
We clean or replace rusted track sections, swap worn rollers and bearing wheels, and re-align the entire run so the gate doesn’t fight itself. On older manual slider conversions, we check the counterbalance and stop hardware too, because a gate that slams at the end of its travel will tear the welds apart over time.
Motor and Limit Switch Adjustment
When a sliding gate in Dania Beach stops short or overshoots, the limit switch settings or the drive chain tension are usually at fault. We tune both, and we inspect the operator housing for salt intrusion around the access cover, which is a common failure point on gates within a mile of the ocean. Typical sliding gate repair here runs $200 – $500, with full track replacement on longer runs going higher. Call (866) 665-5592 for an exact quote before any work starts.
Wrought Iron Gate Repair in Dania Beach
Wrought Iron Gate Repair in Dania Beach is as much about corrosion control as it is about the iron itself. The salt air off the Atlantic, barely a mile from most of 33004, attacks raw steel at the hinge barrel, the bottom rail, and anywhere the original paint has chipped. We regularly see gates from the 1960s and 1970s where the iron is still sound but the fasteners and hinge pins have rusted to crumbs.
Hinge Replacement and Post Re-Setting
We cut out seized hinges, weld in new pins and barrels, and re-set posts that have drifted out of plumb in Dania Beach’s sandy soil. This is the repair that separates a gate specialist from a handyman: if the post footing isn’t re-compacted and anchored correctly, the gate will sag again within a season.
Rust Treatment and Weld Repair
We grind back surface rust, weld cracked scrollwork and broken pickets, then treat and prime the bare metal so the salt air doesn’t immediately undo the work. Wrought iron repair on a typical Dania Beach driveway gate runs $250 – $800 depending on how much welding and post work is involved. The price is set before we start, so there’s no surprise on the invoice.
Trusted Brands We Service in Dania Beach
We work on the gate you have. That means LiftMaster swing and slide operators, FAAC hydraulic and electromechanical units, Elite commercial boards, and Mighty Mule residential kits. Nine brands. One specialty. For Dania Beach customers, we keep common control boards, remote receivers, photo eye kits, and hinge hardware on the truck so we’re not waiting on a parts run while your driveway sits open. When a board is obsolete, we source a compatible retrofit and wire it in cleanly rather than leaving you with a gate that works “sometimes.”
Common Gate Repair Problems We See in Dania Beach Homes
- Salt-air corrosion on hinges and fasteners. The onshore breeze in 33004 carries enough salt to seize a hinge pin in two to three years. We replace with stainless or coated hardware rated for coastal exposure.
- Leaning posts in sandy, saturated soil. After a summer squall, canal-side and beachside gate posts shift. We re-set footings and re-align the gate rather than just tightening a hinge and hoping it holds.
- Obsolete control boards in legacy operators. Older LiftMaster and FAAC boards from the 1990s and early 2000s fail intermittently and parts are discontinued. We retrofit modern boards with current safety logic and wire them to the existing motor when the motor is still solid.
- UV-degraded safety edges and photo eyes. Dania Beach’s year-round sun breaks down the plastic housings on safety sensors, and when they fail, the gate defaults to a hard stop. We replace sensors and re-test the full UL 325 safety circuit.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Dania Beach, FL
Expect to pay $150 – $250 for a basic service call and hinge adjustment in Dania Beach. Sliding gate track and roller repair runs $200 – $500. Wrought iron restoration with welding and rust treatment lands at $250 – $800 depending on how much of the gate needs cutting and re-welding. Post re-setting in sandy soil adds $150 – $350 per post because it requires digging, re-compacting, and re-anchoring the footing. The single biggest cost factor in Dania Beach is corrosion: the longer a gate runs with rusted hardware, the more components need replacement when we open it up. Every job comes with a written quote agreed before work begins, and estimates are free. Call (866) 665-5592.
We Also Serve Cities Near Dania Beach
Carter Gate Repair handles gate work across the southern Broward corridor. Our team covers West Hollywood, Melrose Park, Hallandale Beach, and Pembroke Park, all within a short drive of our Hollywood base. If you’re in one of those areas and need Gate Repair in Dania Beach-quality service closer to home, give us a call and we’ll route a truck your way.
Serving Dania Beach, FL — Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Dania Beach
Yes. We retrofit older operators with current photo eyes, safety edges, and control boards that meet UL 325 standards, as long as the motor and gearbox are still serviceable. For Dania Beach gates near the canal or beachside rentals, this is often the most economical fix because the original post and gate structure are fine but the safety electronics are outdated. We’ll tell you straight if the cost of retrofitting approaches replacement. Call (866) 665-5592 for an assessment.
In almost every case, yes. A leaning post in Dania Beach is usually a footing problem, not a gate problem. We dig out the saturated sandy soil around the post, re-compact the base, re-set the post plumb, and re-anchor it before re-hanging the gate. The gate itself only needs replacement if the post rusted through at the base or the hinge ears are beyond welding. We’ll show you the issue before quoting.
Salt air accelerates rust on hinges, fasteners, and operator housings, and it’s the number one reason gates in Dania Beach fail faster than inland. We use stainless or coated hardware on coastal replacements, apply corrosion inhibitor to treated surfaces, and seal operator enclosures against salt intrusion. For gates within a mile of the ocean, we recommend an annual hinge and sensor inspection, which catches problems before the gate starts binding or the operator burns out. Call (866) 665-5592 to schedule.
It depends on the control board and motor. If the board is obsolete and the motor is weak, replacement is usually cheaper than chasing discontinued parts, especially when you factor in Dania Beach’s corrosion load. But if the motor runs strong and only the board or sensors failed, a retrofit makes sense and saves hundreds. We’ll test the system and give you an honest recommendation with numbers for both paths, agreed before any work starts.
Yes. We service both sliding and swing gates across Dania Beach, including cantilever sliders on canal-side lots, wheeled sliders on older concrete-block homes, and swing gates on everything from beachside bungalows to small multifamily communities. We also handle the operators, safety edges, and access control on both gate types. If you’re in 33004 and your gate isn’t behaving, call (866) 665-5592 for a free estimate.
Contact Carter Gate Repair in Dania Beach
If your gate is sticking, sagging, or stopped entirely, call (866) 665-5592 now. We’ll give you a straight answer about what’s wrong, what it costs to fix, and whether repair beats replacement. Estimates are free, pricing is agreed before work starts, and our technicians know Dania Beach’s gates, salt air, and sandy soil better than any generalist crew ever will.
Written by Mitch Delvecchio, Owner at Carter Gate Repair, serving Dania Beach and southern Broward County.