Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Hollywood Homeowners
When your automated gate stops responding in Hollywood, you’re not just dealing with an inconvenience, you’re dealing with a security gap at your property’s entrance. Electric gate repair in Hollywood usually means one of five things has failed: the operator motor, the control board, a safety sensor, the power supply, or a physical component like a hinge or wheel. Carter Gate Repair fixes all of it, and we work on the gate you already have, not the brand we’d rather sell you. Mitch Delvecchio leads a team that’s spent years working exclusively on gates across South Florida, from home driveway systems to light-commercial operators. Call (866) 665-5592 for a straight answer and a free estimate.
Key Takeaways
- Electric gate repair in Hollywood typically costs $150 to $600 depending on whether it’s a sensor, board, motor, or mechanical fault.
- We service nine operator brands including FAAC, BFT, Linear, and Viking, so we can diagnose quickly without guessing.
- Most gate opener repairs are completed in one visit if we stock the part on the truck.
- Carter Gate Repair is a gate specialist, not a garage door company doing gates on the side.
- Estimates are free and the price is agreed before any work starts, never after.
Styles & brands we work with
Gate Opener Repair
Gate Opener Repair is what we do when the swing or slide mechanism that moves your gate has stopped working, makes grinding noises, or only opens partway. The most common culprits in Hollywood are worn drive gears, failed capacitors, and control boards damaged by South Florida’s humidity and salt air. Carter Gate Repair replaces only the failed component, not a full system unless it’s truly at end of life. Expect to pay $180 to $400 for most opener repairs including the part and labor, with more complex board replacements pushing toward the higher end. On LiftMaster and FAAC swing openers near Pembroke Park and our Electric Gate Repair in Andover service area, we often replace drive gears in under an hour because we keep those parts stocked.
Repairing What’s Broken, Not Replacing What Isn’t
We test the operator before replacing anything. That means checking motor draw, capacitor charge, and gear wear separately so you don’t pay for parts you don’t need. Your gate back on track without replacing what doesn’t need replacing is the whole point.
Opener Diagnostics in South Florida Weather
Hollywood’s humidity corrodes terminals and the coastal breeze carries salt that eats at exposed wiring. We inspect connectors, relay contacts, and ground points as part of every opener repair call rather than just swapping the visible broken part.
Automatic Gate Repair
Automatic Gate Repair covers the full automated system: the opener, the safety devices, the receiver that talks to your remote, and the physical gate itself when it binds or drags. If your gate works sometimes but not others, that intermittent behavior is usually a failing limit switch or a receiver losing signal. Carter Gate Repair handles automatic gate repair in Hollywood from diagnosis to test cycles, and we calibrate the force settings so the gate doesn’t over-torque the next time someone bumps it. Typical automatic gate repair runs $200 to $500 depending on how many components are involved, and we always walk you through exactly what failed and why before quoting the fix. Those full-system checks are what separate a gate specialist from a general handyman making a guess.
Receiver and Remote Issues
When your remote works only at very close range, it’s often a failing receiver antenna or interference from new construction. We test signal strength and replace only the module that’s degraded, not the entire operator.
Calibration After Every Repair
A repaired gate that isn’t recalibrated will fail again in weeks. We set open and close limits, force sensitivity, and obstacle detection to manufacturer spec after every component swap, then run at least five full cycles to confirm.
Electric Gate Motor
An Electric Gate Motor is the electrical workhorse that physically pushes or pulls your gate open and closed. Motors fail slowly and then suddenly: first they run hot, then they struggle, then they stop. In Hollywood’s year-round heat, a motor working against a misaligned track or a stiff hinge burns out faster than it should. Carter Gate Repair tests the motor under load, checks capacitor health, and measures the amp draw to tell you whether it needs lubrication, a new capacitor, a full motor replacement, or just the gate adjusted so the motor stops fighting it. Motor replacement on a residential swing gate typically costs $350 to $650 for parts and labor. On FAAC and BFT slide gates we’ve seen across Dania Beach, an over-tightened chain is the hidden killer more often than the motor itself.
Motor Replacement vs. Motor Repair
We only replace a motor when the windings are burned or the gearbox is chewed up. If it just needs brushes, a capacitor, or a wiring fix, that’s the route we recommend, since a new motor should last ten-plus years but a preventable swap is money wasted.
Preventing Early Motor Failure
Most motors that die early were killed by friction. We check the gate’s pivot points, wheel bearings, and slide track alignment as part of any motor service, because installing a fresh motor on a dragging gate in Hollywood’s humidity just guarantees a comeback.
Gate Access Control
Gate Access Control is the system that decides who gets in: keypads, intercoms, telephone entry, loop detectors, and the occasional card reader or fob station on smaller commercial properties. When the gate opens fine but won’t respond to the keypad, that’s an access control fault, not a motor fault, and it needs a different diagnostic path. Carter Gate Repair works on standalone and integrated access systems in Hollywood, including vehicle loop detectors that get crushed by construction or soaked by standing water after storms. Access control repair typically runs $150 to $400 depending on whether we’re replacing a sensor, a board, a keypad, or rewiring a damaged run. Because we’re electric gate repair specialists in Hollywood, we don’t send you to a separate vendor for the electronics side of things.
Keypad and Intercom Repair
Dead keypads are often a corroded wire nut behind the housing, not a failed unit. We check the wiring path and connection points before recommending replacement, and we reprogram codes on site so you’re never locked out overnight.
Loop Detectors and Vehicle Sensors
A loop detector that fails means your gate won’t open for your car and could close on it. We test inductance, repair cracked saw cuts, and replace sweep or photocell sensors at the same time so the system’s safety logic stays intact.
Commercial Gate Operator
A Commercial Gate Operator is a heavier-duty version of a residential opener, built for higher cycle counts on apartment complexes, HOAs, and small business properties across Hollywood and West Park. These units run hundreds of cycles a day and fail differently: contactor wear, VFD faults on AC operators, and limit-switch drift from constant thermal cycling. Carter Gate Repair services commercial operators from DoorKing, Linear, and Viking, along with most other brands since we maintain a brand-agnostic bench. Commercial operator repair in Hollywood typically runs $400 to $900 depending on the operator class and part availability, and we can often source parts same-week through our distributor network. Property managers near Aventura and Ojus use us because we speak in maintenance schedules, not bandaids.
High-Cycle Wear Patterns
Commercial gates reveal their abuse in predictable places: chain tensioners, limit switches, and the relays that cycle constantly. We inspect those first, which means faster diagnosis and fewer parts bills than a tech who just starts opening panels.
Scheduled Maintenance for Operators
A high-traffic gate in Hollywood that runs 400 cycles a day will fail eventually without maintenance. We offer periodic service plans where we lubricate, adjust, and test the safety edges so the operator isn’t the first thing to break. Check our Electric Gate Repair in Hallandale Beach page for service along the coast.
Brands We Service
We maintain working knowledge of nine gate-system brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range matters, because a BFT hydraulic operator and a Viking slide operator share almost nothing in how they fail. We’ve serviced hundreds of FAAC units and keep their common capacitors, fuses, and limit switches on the truck. For BFT, we regularly replace their hydraulic pumps and repair their solenoid wiring on properties from Carver Ranches to Ives Estates.
Linear and Viking both lean commercial, and we’ve pulled failed contactors from Linear slide operators and rewired Viking master/slave setups across Hollywood. Ghost Controls and Mighty Mule are popular DIY kits that we upgrade and repair when the install didn’t hold up to daily use. DoorKing and Elite round out our bench with their telephone entry and high-cycle slide systems. Whether you have a FAAC, a Viking, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your gate stops halfway and reverses. That’s the obstacle detection system triggering when no obstacle exists, which usually means a misaligned safety edge or photocell. Left unfixed, the gate becomes unpredictable, and unpredictability at an entrance is a liability.
- You hear grinding or a high-pitched whine. Grinding signals gear teeth destroying themselves or a drive chain stretched beyond adjustment. The whine is often a failing capacitor or motor bearing. Both get more expensive the longer they run.
- The keypad or remote only works sometimes. Intermittent response usually means a corroded connection or a failing receiver. It may take days to fully die, but when it does, you’re locked out or locked in with no warning.
- The gate moves on its own or reverses at random. That’s a safety hazard, plain and simple. A gate that moves unprompted can hurt someone or damage a vehicle, and it almost always traces to a control board fault or a shorted input wire.
- You have to push the gate manually. If you’ve disengaged the operator and now the gate’s just a heavy slab on wheels, the motor isn’t doing its job. Manual operation wears hinges and rollers faster and defeats the reason you installed an automated gate in the first place.
Our Process, Step by Step
- 1
Tell us what you’re seeing. Call (866) 665-5592 and describe the symptom. Our team asks specific questions: does it click when you press the remote, does it open but not close, does the keypad beep. That conversation helps us bring the right parts on the first trip.
- 2
We diagnose on site. Mitch Delvecchio or one of our senior techs tests the system in a set order: power supply voltage, control board outputs, motor operation, and safety devices. We use multimeters, amp clamps, and manufacturer diagnostic modes instead of guessing.
- 3
You approve the work before it starts. We explain what failed, why it failed, and what the repair costs. The price is quoted and agreed before any work begins, so there are no invoice surprises at the end of the day.
- 4
We repair and test. After swapping the failed component or making the adjustment, we run the gate through full open and close cycles, test every safety input, and recalibrate force and limit settings.
- 5
We leave you the notes. We tell you what we fixed, what the part number was, and what to watch for in the next few months. If we see something wearing toward failure, we mention it without turning it into a sales pitch.
How Much Does Electric Gate Repair Cost in Hollywood?
A typical electric gate repair in Hollywood runs $150 to $650 depending on what failed. The most common small jobs include replacing a keypad or photocell sensor at $150 to $250, swapping a control board at $300 to $500, and replacing a full residential gate motor at $350 to $650 parts and labor. Commercial gate operator repairs land higher, usually $400 to $900, because those units are heavier and parts are more specialized. These ranges reflect what we’ve actually billed across Hollywood neighborhoods like Lake Forest and West Park, not generic national averages.
What changes the price: the brand (a BFT hydraulic is pricier than a Mighty Mule swing arm), the part’s availability, and whether we need to address a secondary issue like a bent track or a misaligned gate leaf. The best way to avoid overpaying is to fix problems early rather than running a failing motor until it destroys its own gearbox. A free estimate from Carter Gate Repair includes the diagnostic labor, the repair plan, and the exact price before any work starts. We also work with property managers in West Hollywood and Dania Beach who prefer written quotes for board approval.
Our Service Area Near Hollywood
We run service calls across Hollywood and the surrounding South Florida communities, including Hallandale Beach, Pembroke Park, Dania Beach, Carver Ranches, Lake Forest, West Park, Ives Estates, Aventura, Ojus, and Sunny Isles Beach. Most Hollywood callers see a technician the same day or next morning depending on call volume. If you manage a property on the barrier island or near the Aventura mall, we’re already working in your area most weeks, so scheduling is simpler. Our electric gate repair service in Hallandale Beach runs on the same truck stock and same diagnostic process as our Hollywood calls.
Serving Hollywood, FL — Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Hollywood
Electric gate repair is the diagnosis and restoration of an automated gate system’s electrical and mechanical components: the motor, control board, wiring, safety sensors, remote receiver, and gate hardware. In Hollywood, the salt air and humidity accelerate corrosion, so repair often includes cleaning and sealing connection points as well as replacing failed parts. Carter Gate Repair treats electric gate repair as a full-system service, not a parts swap.
Most residential gate repairs in Hollywood are completed in one visit lasting one to two hours. If the part is uncommon and we need to order it from a distributor, the repair may take two to three business days. Commercial operator jobs can take half a day when multiple components need attention.
You’ll pay between $150 and $650 for most residential electric gate repairs in Hollywood. Small sensor and keypad fixes start around $150, control boards run $300 to $500, and full motor replacements land $350 to $650. Call (866) 665-5592 for an exact quote, and remember the estimate is free.
Yes, we service all four of those brands regularly. FAAC and BFT are common on residential and mid-range commercial properties in Hollywood, while Linear and Viking show up on apartment complexes and HOAs. We carry common parts for each on the truck and have distributor access for everything else.
We make every effort to respond same-day for Hollywood callers, particularly when the gate is stuck open and the property is unsecured. Call (866) 665-5592 early and ask about current scheduling. We’ll give you an honest answer about arrival timing rather than a promise we can’t keep.
Every repair we make is backed by a workmanship warranty, and the parts we install carry manufacturer warranties of their own. The warranty period depends on the component, but we’ll always tell you exactly what’s covered before you approve the work. If something related to our repair fails, we come back and make it right.
Have the gate operator’s brand and model number handy if you can find it, usually on a label inside the operator cover. Clear any plants or debris away from the gate’s path so we can run full test cycles. If the gate is currently operating, leave it in automatic mode so we can see the failure happen. If it’s stuck open, know that we’ll prioritize securing the property when we arrive.
Schedule Your Electric Gate Repair Service in Hollywood Today
When your gate is down, every day it stays that way is a day your property is less secure. Call Carter Gate Repair at (866) 665-5592 for a free, no-obligation estimate. Tell us what the gate is doing, and we’ll tell you what it needs. From the control board to the hinge, we’re the gate specialists for Hollywood.
Written by Mitch Delvecchio, Owner at Carter Gate Repair, serving Hollywood and surrounding South Florida communities.