Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Ojus
Gate repair in Ojus usually means one of three things: a swing gate that won’t close, an operator that hums but doesn’t move, or a metal frame that’s rusted through at the hinge. We handle all three, and we’re typically at your property within one business day of your call. If you live in the 33160 ZIP code, you already know that gates here work harder than most: short driveways, constant in-and-out cycling, and salt-heavy air off the Intracoastal put real stress on every moving part. Call (866) 665-5592 and we’ll give you a straight answer on what’s wrong and what it costs before any work starts.

Why Carter Gate Repair Is Ojus’s Preferred Gate Repair Company
Carter Gate Repair is a pure-play gate specialist. We don’t do garage doors, fencing, or general handyman work. Every technician on our team works on gates full time, which means the pattern recognition runs deep: we’ve seen the same failure modes in Ojus townhome clusters dozens of times before. The operator that stops mid-cycle on one street off NE 185th looks a lot like the one that did it two blocks over last month. That local repetition is exactly why we can diagnose quickly and avoid replacing parts that don’t need replacing. We work on the gate you have, not the gate we’d prefer to sell you.
Our reputation in Ojus and the surrounding communities is built on showing up when we say we will and quoting a price that matches the final invoice. Mitch Delvecchio leads the team, and he holds the standard that every job gets finished the same way he’d want it done at his own property. When you call Carter Gate Repair, you get a specialist who has already worked on LiftMaster, FAAC, Elite, and Mighty Mule operators in your exact neighborhood conditions. That matters when salt corrosion and tight clearances are both in play.
Styles & brands we work with





Wrought Iron Gate Repair in Ojus
Wrought iron gate repair in Ojus is one of our most requested services, and for good reason: iron gates dominate the streetscapes here. The look is classic South Florida, but the material is vulnerable. Salt-laden air off the Intracoastal settles into every weld, bolt hole, and hinge pin, and within a few years you get the telltale orange bubbling under the paint and a gate that starts scraping or sagging. A typical wrought iron hinge repair or rust remediation in Ojus runs $220 – $450 depending on how much steel needs grinding, treating, and repainting. Full frame realignment with a new hinge post runs $500 – $850 when the post itself has shifted from ground settling.
Wrought iron repair in Ojus almost always involves two jobs: stopping the corrosion and fixing the mechanical alignment. We grind the rust back to clean metal, apply a rust-inhibiting primer, and match the finish as closely as the existing paint allows. Then we address the sag. On short Ojus driveways, even a quarter-inch drop at the latch side means the gate scrapes concrete or, worse, clips a parked car on the swing path. We correct the hinge geometry and reinforce any weld points that have thinned from oxidation.
Rusted Hinge and Weld Repair
Rusted hinges are the number one cause of wrought iron gate failure in Ojus. When a hinge pin seizes from corrosion, the gate doesn’t swing; it grinds. We remove the hinge, replace the pin and bushing where needed, and re-mount the hinge with the gate’s weight properly distributed. This is also where we catch cracked welds before they become a gate-on-the-ground problem.
Wrought Iron Gate Realignment
Ground settling from Ojus’s high water table is a constant, and it throws gate posts out of plumb by fractions of an inch at a time. Those fractions turn into day-to-day annoyances: a latch that won’t catch, a gate that swings open on its own. We use a hydraulic post puller to reset gate posts and shim them for proper alignment, then lock the geometry in with fresh concrete so the fix lasts.
Metal Gate Repair in Ojus
Metal gate repair in Ojus covers everything from aluminum community-entry gates to steel driveway gates on commercial lots along the US-1 corridor. The common thread is that metal gates here face a rare double threat: salt-air corrosion from the coastal exposure and constant cycling from the dense, high-traffic layout. We see this on townhome shared-entry gates where the operator runs dozens of cycles per day against residents, delivery vehicles, and gate codes. A typical metal gate repair in Ojus – hinge replacement, frame straightening, panel repair – runs $250 – $550. When a steel post has rotted at the base and needs to be cut out and replaced, plan for $600 – $950 depending on post depth and concrete work.
Metal gate repairs in Ojus tend to be structural more often than they are cosmetic. The stress of high-cycle use compounds quickly once a weld weakens or a hinge bushing wears. We repair what’s repairable and tell you honestly when replacement is the cheaper long-term call. You won’t get an upsell speech. You’ll get the actual condition of your gate and a price to fix it.
Aluminum Gate Frame and Panel Repair
Aluminum gates hold up better against salt air than steel, but they have their own weak point: stressed corners and welded joints that crack from repeated flexing. We fix these with reinforced brackets and fresh welds where the alloy allows, restoring the gate’s rigidity without replacing the entire frame.

Steel Gate Post Replacement
Steel gate posts in Ojus often rot from the inside out because moisture wicks up from the base, accelerated by the coastal water table. By the time you see rust at ground level, the post is usually compromised below the surface. We replace posts with proper-depth concrete footings set for the gate’s weight, so a swinging gate stops sagging into your driveway permanently.
Trusted Brands We Service in Ojus
We work on LiftMaster, FAAC, Elite, and Mighty Mule operators every week in Ojus, and we carry the boards, limit switches, safety photocells, and remote controls for these brands on our trucks. That’s the difference between a diagnostic visit and a same-day repair. If you have a newer Elite slide operator on a commercial gate off US-1, or an older Mighty Mule swing unit in a villa cluster, we’ve already seen it. We don’t steer you toward a specific brand because we service the gate you own. Nine brands. One specialty.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Ojus Homes
- Operators stopping mid-cycle: In Ojus’s gated townhome lanes, the operator cycles constantly, and the safety photocell gets bumped or drifts out of alignment from ground settling. The gate starts closing, reads a phantom obstruction, and reverses. We recalibrate the sensor and limit switches so the gate closes fully without ghost reversals.
- Salt-corrosion on control boards: The coastal air here doesn’t just rust metal; it also works on electronics. Board connectors oxidize, and intermittent faults follow: the gate works in the morning but not in the afternoon, or the keypad stops responding. We clean and replace corroded boards and, where possible, reseal the enclosure against the humidity.
- Gates striking parked cars: Short driveways are the norm in Ojus, and a gate that doesn’t hit a car one week can clip it the next if the limit switch drifts. This is a safety issue, not a convenience one. We check swing path clearance as part of every repair and adjust limit and safety-sensor calibration on every automatic gate we touch.
- Rusted hinge posts and frames: Wrought iron gates near the Intracoastal and exposed to salt-air corrosion develop rust at the hinge pins and base of the post. The gate sags, scrapes, and eventually won’t latch. We address it early with hinge replacement and post reset before the frame twists beyond repair.
Pricing for Gate Repair in Ojus, FL
Gate repair in Ojus typically runs $180 – $340 for a straightforward hinge or latch replacement, $250 – $550 for metal frame repairs and realignments, and $500 – $950 when a post needs to be cut out and replaced. Electric gate repair involving a control board or operator is a different category: plan $280 – $600 depending on the board, motor, or safety component involved. The price is always quoted and agreed before any work starts, and that’s the number on your final invoice. Every service call includes a free estimate and an honest assessment of whether a part can be repaired or must be replaced. Call (866) 665-5592 to have one of our techs at your gate.
Key Takeaways:
- We’re gate specialists, not generalists. Every repair we do lives within the gate category.
- We service LiftMaster, FAAC, Elite, and Mighty Mule, among others, and carry local parts for Ojus callouts.
- Free estimates. The price we quote before the work is the price you pay.
- Licensed, insured, and led by Mitch Delvecchio, with the team’s experience concentrated in Ojus and the surrounding northeast Miami-Dade communities.
We Also Serve Cities Near Ojus
Our service area covers Gate Repair in Ojus plus every community within a short drive. We handle gate repairs in North Miami Beach, Sunny Isles Beach, Aventura, and Hallandale Beach, which means your Ojus call gets a tech who’s already working in the area and can route to you without a long dispatch delay. If your gate is acting up and you’re anywhere in the 33160 corridor or just outside it, call us and we’ll let you know exactly when we can be there.
Serving Ojus, FL — Our Local Coverage Area
We’re based in the Ojus area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Ojus
Your gate is stopping halfway because one of two things is happening: either the safety photocell has drifted out of alignment and is sending a false obstruction signal, or the limit switch has shifted and the operator thinks the gate has reached the end of its travel when it hasn’t. In Ojus, ground settling from the high water table makes both problems more frequent, and salt corrosion on the sensor wiring adds a third variable. We can usually correct a stopping gate the same visit with a sensor realignment and limit recalibration. Call (866) 665-5592 for a diagnostic at your property.
Salt air in Ojus affects your gate operator in three ways: it corrodes metal hinges and frame components, it degrades the seals around control-board enclosures, and it oxidizes electrical connectors inside the operator housing. The result is intermittent faults that are hard to reproduce, like a gate that works for a week and then stops responding for an hour. We’ve seen this pattern across the townhome clusters off NE 185th Street. The fix usually involves cleaning or replacing corroded connections, resealing the board enclosure, and treating the metal frame for rust before it spreads.
You need the gate’s limit switches and safety-sensor calibration adjusted, and you need it addressed right away because a gate that clips a car today can clip a person tomorrow. On short Ojus driveways, swing gates often have only inches of clearance between the fully open leaf and a parked vehicle. When the limit switch drifts, the gate swings wider than intended and the sensor may not detect the car in time. Our technicians repair and recalibrate the full swing path so the gate opens to its designed stop point every time. We also inspect the hinge geometry because a sagging gate swings differently than a properly hung one.
For most gate repairs in Ojus, no permit is required. Replacing a hinge, repairing a weld, swapping a control board, or recalibrating an operator falls under standard maintenance and repair. Where a permit may come into play is when a gate post is structurally reset with new concrete footings, or when a new automatic gate is being installed with new electrical runs. Miami-Dade County has specific requirements for gate safety devices, including obstruction sensors and proper clearances on automatic gates, and we build every repair and installation to those county standards regardless of whether a permit is required. We’ll tell you upfront if your specific project needs one.
Yes, we install gate automation systems on existing manual gates throughout Ojus. The conversion includes the operator, safety photocells, a control board, and the low-voltage wiring run, and we typically recommend belt-driven swing operators for the tight clearances common on Ojus driveways. The cost depends on whether your existing metal gate frame can carry the added weight and motor torque, which we assess during the free on-site measure. We work with LiftMaster, FAAC, Elite, Mighty Mule, and other major operators so the unit we install matches your gate’s weight and cycle rate rather than the brand we happen to stock. Call (866) 665-5592 to schedule a measure and written estimate.
Written by Mitch Delvecchio, Owner at Carter Gate Repair, serving Ojus and the surrounding communities.