Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Hollywood, FL | Carter Gate Repair
Ghost Controls gate repair in Hollywood usually means one of three things: a dead solar battery, a salt-corroded control board, or a swing arm fighting a seized hinge. We fix all three, and we’re an independent service provider, not a factory-authorized dealer, so we diagnose what’s actually wrong with your operator and your site conditions rather than running a manufacturer’s script. If your gate just stopped responding, call us at (866) 665-5592 and we’ll get it sorted. We also handle Miramar Ghost Controls service calls.
Why Hollywood Residents Choose Us for Ghost Controls Service
We work on Ghost Controls solar and low-voltage swing and slide operators every week. That means we know the AXS and TITAN control boards, arm geometry, and solar-battery behavior from the inside. Hollywood’s barrier island and finger-isle neighborhoods punish gate hardware harder than almost anywhere else in Broward, so when a Ghost Controls unit fails here, it’s rarely a random defect. It’s usually salt, water, or a hinge that hasn’t moved freely since the last hurricane season. Mitch Delvecchio, our owner, grew up off Sheridan Street and has spent the better part of two decades focusing exclusively on gate systems across Broward County. He’s known around Hollywood for diagnosing a stubborn loop detector or a failing control board without swapping parts until he’s sure. Our Ghost Controls sales & service work covers everything from battery replacement to full operator rebuilds, and we stock the common boards, batteries, and arm components locally so we’re not waiting on a parts truck while your driveway stays open.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Hollywood
These are the failures we see week after week on Ghost Controls operators in Hollywood:
- Salt-fouled control boards and corroded terminal blocks. On Intracoastal and barrier-island gates, onshore breezes push humid, salty air straight into the operator housing. Terminals turn green, connections go intermittent, and the board eventual quits. We clean, reseal, or replace depending on how deep the corrosion runs.
- Solar and battery backup failures after hurricane season. Water-intruded battery compartments and drained cells leave the gate dead when grid power drops. This is the number one post-storm Ghost Controls call we get in Hollywood.
- Seized or misaligned swing arms and hinges. Older wrought-iron gates near the coast bind up, and the Ghost Controls actuator strains against the resistance, throwing travel-limit or obstruction faults. We free the hinge, align the arm, and re-run limits so the motor isn’t fighting the gate.
- Keypad and remote pairing dropouts. Retrofitted mid-century driveways in Hollywood often have non-standard posts and mismatched low-voltage wiring, which makes wireless signal and keypad wiring flaky. We trace the circuit and get your entry devices talking to the board again.
- Battery backup that won’t hold a charge. Even inland in Hollywood, humidity creeps into battery boxes. A Ghost Controls unit that works on AC but dies on battery usually has a failing cell or a corroded battery terminal. We test and replace on-site.
Ghost Controls Service in Hollywood: What Local Conditions Mean for Your Equipment
Hollywood’s barrier island and Intracoastal finger-isle properties sit in a salt-spray zone where a Ghost Controls operator’s battery box and seals deteriorate far faster than the same unit a few miles inland. In the Lakes and Hollywood Lakes neighborhoods, we routinely find battery compartments with rust blooms around the lid and terminal screws that have bonded to the posts. That corrosion works on two fronts: it drains the battery through phantom current, and it eats the control board connections until the operator stops reading inputs altogether. Post-hurricane-season inspections here routinely catch water intrusion before the gate strands the homeowner. If you’re within a quarter mile of the Intracoastal, your Ghost Controls unit is living in a marine environment, whether the literature says “weather resistant” or not. Sealed is not the same as salt-proof. We inspect seals, battery boxes, and board coatings accordingly.
On a canal-front lot in the finger-isle neighborhoods off the Intracoastal, a homeowner’s Ghost Controls dual-swing kit had gone dead after a storm. Our tech found a water-intruded battery compartment and a corroded terminal block, plus a salt-seized hinge on one leaf. We replaced the corroded battery-box hardware, resealed the housing, freed and lubricated the hinge, and re-ran travel limits so both leaves swung clean again on solar backup. That’s the typical Hollywood Ghost Controls job: two or three failures stacked on top of each other, all caused by the same salt air.
Ghost Controls Models & Products We Service in Hollywood
We service the full residential Ghost Controls line, including the TITAN series single-swing opener kits, the AXS series residential swing gate operators, heavy-duty dual-swing kits for double gates, and solar-charged packages with battery backup. On the parts side, we use genuine Ghost Controls boards, arms, and batteries where they matter for the operator, and quality aftermarket hardware like hinges, brackets, and terminal fittings for the gate structure itself. On a salt-corroded operator, we repair the control board and seals when the arm and battery box are sound, and recommend replacement when the housing and motor are already water-intruded. Our vans carry the common Ghost Controls batteries, boards, and arm components for fast Hollywood turnaround.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Hollywood
What you pay depends on what failed and where you are. Here’s what Hollywood Ghost Controls owners typically see, and we offer the same transparent pricing for Ghost Controls service in West Park:
| Service | Typical Range |
|---|---|
| Service call and diagnostic (Hollywood) | $69 – $189 |
| Control board replacement (Ghost Controls AXS/TITAN) | $225 – $450 |
| Battery replacement (solar backup) | $120 – $260 |
| Swing arm replacement | $180 – $380 |
| Hinge repair (single gate leaf) | $150 – $300 |
| Full dual-swing operator rebuild | $600 – $1,200 |
The final price is always quoted and agreed before any work starts. A free estimate includes a look at the operator, the battery box, the hinges, and the gate’s travel path, so you know the full picture before you approve anything. Call (866) 665-5592 for an exact quote, estimates are free.
Serving Hollywood, FL — Our Local Coverage Area
We’re based in the Hollywood area and know this community well, and we also provide Ghost Controls in Andover. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Hollywood
Storm water gets into the battery compartment, usually through a compromised seal or a corroded lid gasket, and either drains the battery or shorts the terminal block. Hollywood’s summer storms push horizontal rain, which finds every gap in an outdoor operator housing. We reseal the box, replace the battery if it’s been sitting wet, and coat the terminals against further corrosion. Call (866) 665-5592 for a storm-damage inspection.
Yes. Solar operators on the Hollywood barrier island need more frequent attention than the same unit inland because the salt spray clouds the panel and corrodes the charge controller connections. We clean the panel, test the charge path, and replace the battery if it’s no longer holding a charge from the available sun.
Usually the gate. A Ghost Controls actuator on a Hollywood wrought-iron gate strains when a hinge has seized or the gate leaf has sagged out of its original travel arc. We check the hinge movement and gate alignment first, then test the actuator. If the hinge is the problem and the motor is sound, we repair the hinge and re-run travel limits, saving you the cost of a new operator. Estimates are free: (866) 665-5592.
Both. We repair boards with light corrosion or a single failed relay when the board coating is intact and the rest of the circuitry tests clean. When a board has been salt-soaked for months or shows blown traces, we replace it with a genuine Ghost Controls board. We show you the failed board and explain which route makes sense for your unit’s age and location.
Yes. We install compatible keypads, remotes, and intercom modules on existing Ghost Controls operators, and we handle the low-voltage wiring to your post or entry gate. On Hollywood’s retrofitted mid-century driveways, that sometimes means pulling a new wire run when the original has rotted or been spliced too many times. Call (866) 665-5592 and we’ll tell you what your operator can support.
Service Areas Near Hollywood
We run Ghost Controls service calls throughout Hollywood service area and into the neighboring communities. If you’re in Hallandale Beach, we can typically reach you quickly, since it’s just a few minutes south on Federal Highway. See our Ghost Controls service in Hallandale Beach page for details. We also cover West Hollywood, Pembroke Park, Dania Beach, and Carver Ranches. For the West Hollywood side of 441, check out Ghost Controls service in West Hollywood.
Book Your Ghost Controls Service in Hollywood Today
If your Ghost Controls gate is down, a clicker won’t pair, or the leaves are grinding halfway, call (866) 665-5592. We’ll schedule a diagnostic, give you a written price before we touch a wrench, and get your gate working again. Same-day visits are available for many Hollywood calls, and we also offer Ghost Controls repair in Carver Ranches.
Written by Mitch Delvecchio, Owner at Carter Gate Repair, serving Hollywood since the early 2000s.