Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateDoorKing Gate Repair in West Hollywood, FL | Carter Gate Repair
We repair DoorKing gate operators throughout West Hollywood, FL, and we’re the team local homeowners call when a 6050 swing gate stops mid-travel or a 6400 slide gate goes dead after a storm. Our work here differs because we understand what canal-front salt air and hurricane-season flooding do to DoorKing electronics and steel hardware. We are an independent DoorKing service provider, not manufacturer-affiliated. If your gate is down, call us at (866) 665-5592 for a straight diagnosis and a free estimate before any work begins.
Why West Hollywood Residents Choose Us for DoorKing Service
Most gate companies in Broward County work on whatever rolls into their queue. We focus on gates exclusively. Mitch Delvecchio, our owner, grew up off Sheridan Street in Hollywood, FL, and spent his early trade years at Broward College’s program building the electrical and mechanical foundation that now carries into every DoorKing job we take. When a West Hollywood homeowner calls us about a 1601 control board that won’t respond, we already know the failure patterns for their exact operator. We also arrive with OEM-compatible parts on the truck, because driving back to a supply house wastes an afternoon that a stuck gate does not allow. Our team covers the full DoorKing sales & service range, but this page is about what actually happens to DoorKing equipment in West Hollywood’s specific conditions.
Styles & brands we work with
Common DoorKing Gate Repair Problems We Solve in West Hollywood
- 1601 control board failures after thunderstorms. South Florida’s daily summer lightning produces surge creep that hits DoorKing 1601 boards hard. We see pitted, green terminal strips and dead open/close cycles most often in West Hollywood after a close lightning strike near the canals. The fix is usually board replacement plus a surge protector on the incoming power, not a full operator swap.
- Slide-gate roller and track wear on 6400 operators. Many West Hollywood homes sit on 1950s-era concrete driveways where the track sits low. Standing water from summer downpours submerges rollers and accelerates rust. We replace rollers and re-bed tracks rather than telling you the whole operator is shot.
- Limit-switch drift on 6050 swing operators. Salt air from the Atlantic, just a few miles east, corrodes the limit cams on DoorKing 6050 swing arms. The gate stops short or over-travels and slams the stop post. We clean or replace the cams and re-set the limits so the gate closes the way DoorKing designed it.
- Corroded latch and solenoid failures on 1812/1837 phone entry systems. Humidity here pits the metallic keypad buttons on DoorKing telephone entry units, and the handset cords corrode quickly. We carry replacement solenoids and keypad components so residents don’t lose visitor access for days.
- Dead operators from canal-side flooding. DoorKing 6400 slide operators mounted low on original concrete pads take canal water during heavy rains. We remount them on raised pedestals so the electronics clear future flooding. This is one of the most common West Hollywood repairs we do that you won’t see inland.
DoorKing Service in West Hollywood: What Local Conditions Mean for Your Equipment
West Hollywood’s 33021 zip sits in the heart of the Hollywood – Broward coastal corridor. Canal-front and hurricane-shutter-era homes dominate the landscape, and the salt-laden air just a few miles from the Atlantic means hinges, latch plates, and limit cams rust through years earlier than they do in Pembroke Park or inland DoorKing in Hollywood. Because these homes sit canal-front, the bracket-mounted DoorKing 6400 slide operators along the 33021 canals get hit by both salt spray and canal-side flooding at the same mounting height. The original low concrete pads – poured when these ranches went up in the 1960s and 1970s – hold water after every heavy rain. We routinely remount those operators on raised stainless pedestals instead of setting them back on the old pad. A generic DoorKing repair page will never tell you that. A technician who has never worked West Hollywood won’t think to look for it until the second flood kills the replacement board. We plan for it on the first visit.
On a canal-front ranch property in the Hollywood Lakes area of 33021, a homeowner’s DoorKing 6400 slide gate was dead after a July storm. The original low-slung operator housing had taken canal-side water, and the 1601 board was pitted green at the terminals. We replaced the board, swapped the corroded rollers, and remounted the operator on a raised marine-grade pedestal so the next storm surge clears the electronics. That gate has cycled cleanly since.
DoorKing Models & Products We Service in West Hollywood
We work on the DoorKing 6050 swing gate operator, the 6400 slide gate operator, and the 1601 control board used across the 6002/6400/6050 series. We also service the DoorKing 1812 and 1837 telephone entry and access intercom systems. If you own a DoorKing operator we haven’t listed, call anyway. We fit genuine DoorKing replacement boards, rollers, limit switches, and solenoids where they exist, and vetted aftermarket equivalents for discontinued hardware. For West Hollywood turnaround, we stock common 1601 boards, slide-gate rollers, and swing-arm limit switches on the truck so most repairs finish in one visit.
See the difference
Before
After
Before
After
Before
AfterDoorKing Service Pricing in West Hollywood
Most DoorKing repairs in West Hollywood run between $180 and $650 depending on what failed and whether parts are stock DoorKing or aftermarket. A 1601 control board replacement typically lands in the $400 – $650 range including the board. Limit-switch and cam work on a 6050 swing operator usually runs $180 – $280. A full slide-gate roller and track service on a 6400 sits around $250 – $400. Telephone entry keypad and solenoid repairs on 1812/1837 units run $150 – $350. We quote every job before we start, so the number you approve is the number you pay. Estimates are free. Call (866) 665-5592 and we’ll give you a real number, not a guess.
Serving West Hollywood, FL — Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – DoorKing Gate Repair in West Hollywood
Almost always the limits in West Hollywood. Salt air corrodes the limit cams on 6050 swing operators, which makes the gate stop short or over-travel. We clean or replace the cams and re-set limits, which fixes the issue in most cases without touching the board.
Yes. We keep common DoorKing 1601 boards stocked for West Hollywood calls because storm-surge and lightning failures are frequent here. We can usually replace a dead board the same day we diagnose it.
Yes. Humidity pits the metallic keypad buttons and corrodes handset cords on 1812 and 1837 systems. We replace the solenoid, keypad components, or handset as needed, and we stock the common parts that fail in West Hollywood’s salt air.
If the operator chassis and gearbox are sound, we repair. If a flooded or salt-pitted unit needs a board plus motor plus gearbox, a new operator is the better spend. We’ll tell you which path makes sense for your specific 6400 after we open it up. Call (866) 665-5592 for an honest assessment and a free estimate.
Yes. We’re an independent DoorKing service provider, and we work on the gate you have, regardless of who installed it. Brand loyalty to the original installer doesn’t matter to us. What matters is what’s wrong with your operator and how to fix it correctly the first time.
Service Areas Near West Hollywood
We serve West Hollywood, Hollywood, Hallandale Beach, and Pembroke Park. You’ll also find us across West Hollywood service area neighbors who need DoorKing work. For operators just south of the 33021 line, see our DoorKing service in Pembroke Park page and DoorKing service in Dania Beach for coastal work.
Book Your DoorKing Service in West Hollywood Today
If your DoorKing operator is down, call (866) 665-5592 now. We diagnose honestly, quote before we start, and we stock the parts that fail most often in West Hollywood. If it swings, slides, or rolls, there’s a reason it stopped – and it’s usually not the reason you think.
Written by Mitch Delvecchio, Owner at Carter Gate Repair, serving West Hollywood, FL.