Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Dania Beach, FL
Gate installation in Dania Beach usually starts with a conversation about salt air, sandy footings, and hurricane-season wind. Most of 33004 sits within a mile of the ocean, which means a new driveway gate here has to fight corrosion from day one in ways a gate in Hollywood or Fort Lauderdale never will. Carter Gate Repair has served Dania Beach since 2015, and we plan every install around that reality: galvanized and powder-coated hardware, stainless fasteners, and posts set to hold in saturated sand. Call (866) 665-5592 for a free estimate on a gate built for this coastline, not just bolted to it.
Why Dania Beach Homes Are Different
Dania Beach splits roughly into two worlds: the older single-family lots east of US-1 with original 1950s-to-1980s concrete-block homes, and the tighter multifamily and mobile-home communities that run through the middle of town toward the Dania Cut-off Canal. Both share one problem: the ocean is close enough that salt-laden onshore air works on every exposed piece of metal year-round. We see hinges rusted through in three years, operator enclosures pitted by the time a unit is five years old, and fasteners so swollen with corrosion they have to be cut off rather than turned.
It is not just the metal. Dania Beach sits on sandy, fast-draining soil, and after a heavy summer squall or a hurricane-season blow, gate posts along canal-side and beachside streets lean as the saturated sand lets go around the footings. Re-setting a post in sand is a routine job here, not an exotic one. Hurricane season, June through November, also drives calls for wind-rated gates and post-storm realignment, because a gate that survived its first ten years may not survive the eleventh if the hinges have been quietly rusting from the inside. Housing age matters too: the original chain-link and wrought-iron driveway gates on many mid-century homes were never built for automation, so when we install an operator we often rebuild the gate’s frame and hinges at the same time, otherwise the motor simply tears the old gate apart. This is why a Dania Beach gate job rarely looks like the same job ten miles inland.
Styles & brands we work with
Our Main Dania Beach Services
Dania Beach homeowners and property managers call us most often for two things: a gate that will not move, and a gate that moves when it should not. Each gets its own service page below because each pulls a different set of skills from the truck.
Gate Repair in Dania Beach
Repair work here is dominated by rusted hinges, sagging frames, and posts that have drifted out of plumb in sandy soil. A gate that scrapes the driveway or will not latch is usually not a lost cause; it needs hardware replaced or a post re-set, not a whole new gate. We work on what is already there: Gate Repair in Dania Beach covers chain-link, wrought-iron, aluminum, and pool-enclosure gates, with a focus on fixing the failure rather than selling a replacement the property does not need.
Electric Gate Repair in Dania Beach
When the operator hums but the gate does not move, or the keypad does nothing, the problem is usually in the low-voltage side: a control board, a loop detector, a photo-eye, or a safety edge. Salt air accelerates those failures here more than anywhere inland, and diagnosing them properly means understanding how the whole system talks to itself. Electric Gate Repair in Dania Beach covers operators, wiring, access-control components, and the safety systems that matter most near beachside rentals and canal-front properties.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Dania Beach
Gate installation in Dania Beach is a different job from gate installation almost anywhere else in Broward County. The salt air that eats fasteners a mile inland is a daily fact here, and the sandy soil means posts need bigger, deeper footings with more concrete than a standard install would use. A new Gate Installation here has to be planned around corrosion from day one and wind from June to November. We install gates built for this coastline: hot-dipped galvanized or powder-coated steel, stainless hinges and fasteners, and operators sealed against humidity. Whether it is a driveway gate for a 1960s concrete-block home east of US-1, a sliding gate for a canal-side lot, or an automated entry for a small multifamily property off Stirling Road, we spec the system for the conditions, not from a catalog.
Automatic Gate Installation
Signs you need it
You are getting out of the car to open and close a gate every time you leave or arrive, or the gate is being left open because operating it by hand is too much trouble.
What it costs in Dania Beach
Automatic gate installation in Dania Beach typically ranges from $4,500 to $12,000 depending on gate size, operator type, and the amount of electrical and concrete work required.
How we do it
We survey the opening and the soil, set posts on concrete footings sized for sand and wind, mount the operator on a reinforced plinth, run the low-voltage and line-voltage wiring, install the safety edges and photo-eyes, and program the travel limits so the gate stops exactly where it should.
Driveway Gate Installation
Signs you need it
The existing driveway gate has sagged past the point where hinges can hold it level, or the posts have rusted or leaned so far in the sandy soil that the gate can no longer close securely.
What it costs in Dania Beach
A new driveway gate in Dania Beach, including posts and hardware, typically runs from $3,500 to $9,500 before automation is added.
How we do it
We remove the old gate and set new posts in concrete footings engineered for the soil, hang the new gate on stainless or galvanized hinges, and adjust it so it swings level and latches without binding.
Sliding Gate Installation
Signs you need it
The driveway slopes toward the house or the setback is too short for a swing gate, so a sliding gate is the only design that will work without dragging or blocking the drive.
What it costs in Dania Beach
Sliding gate installation in Dania Beach typically ranges from $5,000 to $14,000 depending on gate width, track or cantilever design, and the operator selected.
How we do it
We pour a concrete track or set cantilever posts, build the gate to span the opening, mount the operator and rack, wire the safety devices, and test the gate through several hundred cycles before we call the job done.
What Gate Installation Costs in Dania Beach
| Item | Typical range in Dania Beach |
|---|---|
| Driveway gate (materials and install) | $3,500 – $9,500 |
| Automatic gate system (gate, operator, controls, safety) | $4,500 – $12,000 |
| Sliding gate system (track or cantilever) | $5,000 – $14,000 |
Does a Dania Beach gate need hurricane-rated hardware?
Not all gates are required to be wind-rated, but anything within a mile of the coast should use corrosion-resistant hardware and a gate frame stiff enough to handle sustained wind. We spec stainless fasteners and reinforced posts on every beachside install, regardless of code minimums, because salt air and summer storms punish anything less. Call (866) 665-5592 to talk through what your property actually needs.
How long does a gate installation take in Dania Beach?
Most residential driveway gate installations take one to two days once materials arrive, but sandy soil or rotted post footings can add time. We quote the full scope, including concrete work, before we start, so the schedule does not surprise you. Call (866) 665-5592 for a written estimate based on your site.
Brands We Service in Dania Beach
Carter Gate Repair works on the gate you already have, across brands. Our Dania Beach technicians carry parts and control boards for LiftMaster, FAAC, and Elite operators, and we regularly repair Mighty Mule and Ghost Controls units on residential driveway gates. Since we are not a dealer for any single manufacturer, we repair what is failing rather than steering you toward a replacement brand. See our brands for the full range we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Dania Beach, FL
| Service | Typical range in Dania Beach |
|---|---|
| Gate repair (hinge, latch, or frame work) | $225 – $850 |
| Electric gate diagnostic and repair | $275 – $1,200 |
| Operator replacement | $1,200 – $4,000 |
| Loop detector replacement | $350 – $900 |
| Safety edge or photo-eye replacement | $250 – $700 |
| Control board replacement | $400 – $1,500 |
| Driveway gate installation | $3,500 – $9,500 |
| Automatic gate installation | $4,500 – $12,000 |
| Sliding gate installation | $5,000 – $14,000 |
In Dania Beach, the two things that push a quote toward the top of these ranges are salt corrosion and sand. A gate that looks repairable from the street may have posts rusted below grade or footings that have shifted in the soil, and we price the job for what we actually find after the first inspection. We quote every job before any work starts, and the price we agree on is the price you pay.
Neighborhoods We Serve in Dania Beach
We run calls all over 33004, from the older single-family streets east of US-1 down to the canal-front and beachside pockets where salt air works fastest. Response time for most Dania Beach repair calls is one to two business days, and we schedule around your availability.
- East Dania Beach (east of US-1)
- Dania Cut-off Canal waterfront
- Stirling Road corridor
- Dania Beach Boulevard area
- Mobile-home and multifamily communities off Federal Highway
Service Area – Cities Near Dania Beach
Carter Gate Repair is based in Hollywood and serves Dania Beach and the surrounding Broward County coast. We also work in West Hollywood, FL, Melrose Park, FL, Hallandale Beach, FL, and Pembroke Park, FL. If your property is a few minutes outside Dania Beach, call us: the salt air does not stop at the city line.
Serving Dania Beach, FL — Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dania Beach
Dania Beach generally requires a permit for gate installations that involve new posts, concrete, or electrical work, especially on the beachside and canal-front properties where code enforcement is more active. We handle the permit paperwork as part of the installation scope and tell you exactly what the city will need before we start. Call (866) 665-5592 and we can check your specific address.
Most repair and diagnostic calls in Dania Beach are scheduled within one to two business days. We are based in Hollywood, so a Dania Beach drive is short, and we batch nearby calls to keep response times tight during hurricane season, when realignments and post-storm repairs spike.
Yes. Carter Gate Repair handles both single-family and light-commercial gate work, including the pedestrian and vehicular gates common in Dania Beach’s multifamily and mobile-home communities. The operator hardware is the same; the access control and safety requirements are what change, and we handle both.
If your Dania Beach gate is sagging, rusted, refusing to open, or simply needs to be replaced with something built for this coastline, call (866) 665-5592. We will give you a straight answer and a free estimate, and we will not replace what does not need replacing.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dania Beach Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Erin Schaefer"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jodi Fletcher"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Javier Delgado