Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Carol City, FL | Carter Gate Repair
Ghost Controls gate repair in Carol City usually comes down to one of two things: a mount that’s failed against old concrete block, or a board and battery that’s been cooked by heat and salt air. We’re Carter Gate Repair, and we provide independent Ghost Controls service across the 33056 zip code, from single-swing driveway operators to solar and battery-backup slide systems. The difference here is that we already know what Carol City’s housing stock does to these operators, so we diagnose faster and replace less. Call (866) 665-5592 for a free estimate.
Why Carol City Residents Choose Us for Ghost Controls Service
We work on Ghost Controls operators weekly across South Florida. The TDS and TSS swing kits, the TSL slide operators, the AXDP and AXPB solar and battery packages. We’ve opened enough of those sealed housings to know exactly where corrosion starts and which terminals fail first in this climate. When a Ghost Controls arm stops swinging in Carol City, we don’t stand in front of the gate reading the manual. We’ve already worked on that model this month.
Mitch Delvecchio, who runs our crew, started in Broward College’s trades program in the early 2000s and has spent the two decades since focused on gate systems. He’ll tell you that if it swings, slides, or rolls, there’s a reason it stopped, and it’s usually not the reason you think. In Carol City, that reason is often a failing mount, not a failing motor. We’re independent, so we diagnose what’s actually wrong rather than what’s easiest to sell. Our reputation in the 33056 area is built on that.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Carol City
- Corroded control-board terminals and seized arm pivots. Ghost Controls housings are sealed well, but the fasteners on the arm and battery compartment pit in year-round humidity. On a block-wall home in Carol City, we regularly see terminals that have gone green and pivots that need penetrating oil before they’ll move. We clean, re-seat, and replace only what’s beyond saving.
- Battery and solar charge failures in summer heat. Undersized or aging lead-acid batteries sit inside a hot, unvented enclosure and stop holding a charge. Your gate works fine on utility power, then the first outage hits and the gate won’t open. We check the AXDP/AXPB solar and backup packages specifically, test the charge controller, and swap batteries when they’ve actually died, not before.
- Limit and encoder faults after a storm. Wind loading pushes the gate leaf or the arm out of alignment, and the operator either throws fault codes or reverses mid-travel instead of latching. After hurricane season, this is the most common Ghost Controls call we get in Carol City. Realigning the leaf and re-homing the limits usually clears it.
- Mounting failure on aging block walls and posts. Ghost Controls arms torque against the post every cycle. When that post is rotted wood or 1950s concrete block with spalling, the bracket pulls loose, the gate sags, and the latch no longer lines up. This is the Carol City signature. The motor’s fine. The anchor isn’t.
- Gate leaf sag that drags the operator down. Chain-link and aluminum side-yard gates on original hardware sag over time. The Ghost Controls operator keeps pushing a leaf that’s dragging on the ground, which overloads the arm and shortens the board’s life. We rebuild the hinge side, re-hang the leaf, and the operator stops working so hard.
Ghost Controls Service in Carol City: What Local Conditions Mean for Your Equipment
Carol City’s mid-century block homes were rarely built with true gate anchors. Most gates in the 33056 neighborhoods are hung on whatever was already there, an exterior block wall, a poured stair column, a wood post someone set in the 1970s. Concrete block spalls over decades of humidity and rain. Posts rot below grade where you can’t see it. What this means for Ghost Controls owners specifically — whether in Carol City or needing Scott Lake Ghost Controls service — the operator gets blamed for a gate that was never properly mounted in the first place. The arm torques against a failing anchor, the limit drifts, the board faults, and the whole system looks dead. Fix the mount first, re-home the limits, and the operator that seemed finished usually runs fine. If you just bolt a new operator onto the same failing block, you’re buying the same problem twice.
Salt-laden Atlantic air adds another layer. Carol City sits close enough to the coast that exposed metal hardware rusts faster than it would ten miles inland. Fasteners, hinges, and battery terminals all pit. The Ghost Controls control board itself is usually fine, but the connections around it fail.
Ghost Controls Models & Products We Service in Carol City
We service the full Ghost Controls residential and light-commercial lineup: the Heavy-Duty Single Swing (TDS) kits, Standard Duty Dual Swing (TSS) kits, Slide (TSL) operators, and the AXDP/AXPB solar and battery-backup accessory packages. When your operator is worth keeping, we fit genuine Ghost Controls control boards, arms, batteries, and accessories. For the gate hardware itself, hinges, brackets, fasteners, we use quality-rated aftermarket parts that withstand Florida corrosion better than stock. We stock common Ghost Controls boards, batteries, and hinge hardware for fast turnaround in Carol City, so most repairs on Ghost Controls systems here don’t wait on a parts order. This is the work we do every week as Ghost Controls sales & service specialists.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Carol City
Ghost Controls repair pricing in Carol City depends on what actually failed. Battery replacement typically runs $120 to $220, limit and alignment service $140 to $200, and a new control board $350 to $550 when the board is truly shot. If the mount has failed and we’re resetting anchors into block, that adds $180 to $350 depending on the condition of the wall. Full replacement operators, installed, run $900 to $1,600 for single-swing and $1,100 to $2,000 for dual-swing or slide setups. We quote every price before work starts, no invoice arrives bigger than the number we agreed on, and estimates are free. Call (866) 665-5592 for an exact quote.
Serving Carol City, FL — Our Local Coverage Area
We’re based in the Carol City area and know this community well, and we also handle Ghost Controls repair in Lake Lucerne. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Carol City
The gate leaf got pushed out of alignment during a storm, and the limits drifted with it. The operator thinks it’s hitting something, so it reverses. The fix is a realignment and limit re-home, about $140 to $200, not a new board. Call (866) 665-5592 and we’ll get it latching again.
The solar panels hold up fine. The batteries don’t. Heat and humidity inside the enclosure shorten lead-acid battery life, so the backup stops holding a charge long before the panel fails. We test the whole AXDP/AXPB system, including the charge controller, and replace only what’s dead.
In Carol City the sag usually traces back to the mount. A 1950s block wall or an old wood post has finally given way, and the gate leaf is being held up by the operator arm instead of the hinges. We rebuild the hinge side and re-anchor the bracket, which also saves the board from the extra load.
Yes. Ghost Controls accessory terminals accept keypads and intercom wiring, and we add those on existing TDS, TSS, and TSL installs regularly. The install includes setting the accessory wiring into the board correctly so it doesn’t trip any fault codes.
We’re independent. We’re not authorized, sponsored, or endorsed by Ghost Controls, and we diagnose and repair on that basis. That independence means we’ll keep a board when a dealer would push a full replacement, and we’ll be honest when the operator truly is finished. Call (866) 665-5592 for a straight answer on what yours needs.
Service Areas Near Carol City
Along with Carol City proper, our crews work Carol City service area neighborhoods daily and cover the surrounding communities: Hollywood, Hallandale Beach, West Hollywood, Pembroke Park, Dania Beach, and Carver Ranches. We also run Ghost Controls service routes into Ghost Controls service in Boulevard Gardens and Ghost Controls service in Cooper City, so if your gate sits just outside the 33056 line, it’s still within our normal range.
Book Your Ghost Controls Service in Carol City Today
If your Ghost Controls gate is acting up, call (866) 665-5592. We’ll quote the repair before we start, and in most Carol City cases we can get to you the same day the gate fails, usually before it fails again on a Friday afternoon.
Written by Mitch Delvecchio, Owner at Carter Gate Repair, serving Carol City and the surrounding South Florida gate systems since the early 2000s.