Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Andover
Electric gate repair in Andover typically runs $190 – $390 for most opener and control board issues, with full gate motor replacement landing between $650 and $1,400 depending on the operator brand and gate weight. That’s the honest range for this corner of southwest Broward. We work on the gate you already have, diagnosing the actual failure before recommending any repair.
If your gate won’t open, reverses mid-cycle, or makes a grinding sound every time you pull into the driveway off Pembroke Road, call us at (866) 665-5592. Carter Gate Repair serves all of Andover’s 33023 ZIP, and we know the specific ways salt-air and storm-season moisture tear up gate hardware here. No upsell, no replacement pitch you don’t need. Just a straight diagnosis and a fix that holds.
We’re gate specialists, not generalists. Every technician on our team works exclusively on gates: electric gate repair, gate repair, and installation. That focus matters when the problem is a corroded photo-eye lens or a control board that’s been shorted by a rainy-season power surge. If your in-ground operator is failing, we’ll tell you what’s wrong and what it costs before any work begins.
Why Carter Gate Repair Is Andover’s Preferred Electric Gate Repair Company
Homeowners in Andover call us because the gate repair companies they find online are usually garage door companies that handle gates as a side line. That’s not us. Our entire trade is gates, and our team has hands-on working knowledge of nine operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a competitor’s tech is on his phone in your driveway looking up your operator model, we’ve already repaired that exact board twice this month.
Andover’s housing stock shapes the work we do here. Most properties are mid-century to 1980s ranch homes and duplexes with fenced yards, driveways, and utilitarian metal or wood gates rather than decorative estate entrances. That means we see a lot of gates that were originally manual and got retrofitted with an operator years later, often without proper safety sensors. We’ve done Electric Gate Repair on enough of those retrofits to know exactly where they fail.
Our crew knows the streets here: the blocks along SW 33rd Street, the homes backing up to the canal, the duplex lots near the Carver Ranches line. We don’t GPS our way into Andover from a dispatch center in Broward’s industrial district. We’re familiar enough with the neighborhood to give you a realistic arrival window, not a vague one. Call (866) 665-5592 and you’ll get a real answer from a gate tech, not a call center script.
Styles & brands we work with
Commercial Gate Operator in Andover
Commercial Gate Operator work in Andover is lighter than what you’d find in Miramar’s industrial parks, but it exists: small apartment complexes on the edges of the 33023 area, fenced church lots, and a handful of storage facilities. These operators run more cycles in a week than a residential gate runs in a year, so the failure profile is different. You’re not diagnosing a corroded hinge; you’re chasing a worn-out motor, a failing capacitor, or a control board that’s been shorted by a transformer surge.
A commercial gate operator repair in Andover typically runs $450 – $1,200 depending on the operator class and whether the board or motor needs replacement. Full operator swaps on commercial slide gates run $2,800 – $5,500 installed. We quote every price up front and you approve it before we touch the equipment.
Operator Diagnostics and Board Replacement
Most commercial operator failures in Andover come down to three causes: lightning-strike board damage, overheating from a motor running out of alignment, or a limit switch that’s lost calibration. We bench-test boards before replacing them. If a component can be repaired, we repair it.
Slide Gate Motor Replacement
Commercial slide gates in Andover are usually chain-driven or rack and pinion. When the motor fails, the gate either won’t move or shudders and stalls. We’ll tell you whether the motor is salvageable or whether you’re better off replacing the operator head. Either way, you get the quote first.
Gate Opener Repair in Andover
Gate Opener Repair in Andover is the most common electric gate call we get in the 33023 ZIP. Most of these are residential swing gate openers bolted to aging metal or wood gates, many of them retrofitted onto gates that were never designed for automation. The opener works against a gate that’s too heavy, badly aligned, or corroded at the hinge, and something gives: a stripped gear, a tripped overload, a control board that stops responding.
Typical gate opener repair in Andover runs $190 – $390 for gear, limit switch, or control board work. When the opener itself is beyond repair, replacement with a mid-range LiftMaster or FAAC unit runs $750 – $1,300 installed. We stock common boards and gear kits for the brands we service, which means we can often finish the repair the same day we diagnose it.
Openers That Reverse or Stall Mid-Cycle
If your gate starts to close and then jerks back open, the problem is often a force limit that’s set too low for the gate’s actual weight. But in Andover, we also see a lot of false reverse trips from photo-eye lenses clouded by salt-air film. We clean the lens, check the alignment, and reset the force profile to match the gate without triggering the entrapment alarm.
Retrofitting an Opener onto an Older Manual Gate
Plenty of Andover homes still have manual gates. When you add an operator to a manual gate, the hinges, post footings, and gate weight all matter more than the opener brand. We’ll assess whether the gate is structurally ready for automation before bolting on an opener that will strain and fail early. UL 325 safety edges and photo-eyes are part of every retrofit we do.
Trusted Brands We Service in Andover
We service the gate operator you already have, not the brand we’d rather sell you. That’s the difference between a gate specialist and a dealer. Our techs have certified working knowledge of nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Andover, we most commonly service LiftMaster and FAAC operators on residential swing gates, with Mighty Mule units showing up on smaller yard gates and some DIY retrofits. We keep common boards, gear kits, and photo-eyes stocked for rapid turnaround on Andover jobs. Nine brands. One specialty.
Common Electric Gate Repair Problems We See in Andover Homes
- Corroded photo-eye lenses. Salt-laden air from the nearby coastal Broward corridor films over safety sensor lenses within a season. The gate reverses randomly, the owner assumes the board is bad, and the real fix is cleaning the lens and resealing the housing.
- Misaligned slide gates after storms. Hurricane-season downpours shift post footings and cause slide gates to bind against the rack and pinion. The opener strains, trips the overload, and eventually tears up the gear. Realigning the gate and re-securing footings fixes the root cause.
- Sagging hinge posts on older swing gates. A 1970s ranch gate on a 40-year-old post will sag. The opener fights the extra weight, the motor runs hot, and the gears strip. We correct the sag before repairing the opener so you don’t rebuild the same failure.
- Missing safety edges on retrofitted operators. Many Andover gates that were converted from manual to automatic never got proper UL 325 entrapment protection. That’s a safety problem and a liability problem, and we address it on every repair we touch.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Andover, FL
Most electric gate repairs in Andover land between $190 and $390, covering diagnostics, photo-eye cleaning or replacement, limit switch resets, and common control board repairs. Gate opener replacement runs $750 – $1,300 installed for residential LiftMaster, FAAC, or Mighty Mule units. Commercial operator work runs higher: $450 – $1,200 for repairs and $2,800 – $5,500 for full operator replacements. The price you’re quoted is the price you pay. We sign off on the number before any work starts. Call (866) 665-5592 for a free estimate on your gate. Andover’s salt-air environment means early repairs are almost always cheaper than waiting for a seized post or a burned motor.
We Also Serve Cities Near Andover
Carter Gate Repair serves Andover and the surrounding southwest Broward communities. If your property sits close to the Andover line or you work in a neighboring city, we cover Carver Ranches, Miramar, West Park, and Hollywood as well. Many of our Andover customers own rental properties in nearby neighborhoods, and we handle those gates too. One call to (866) 665-5592 covers the whole area.
Serving Andover, FL — Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Andover
Yes, and in Andover it’s more likely than anywhere else we work. Salt-air film coats photo-eye lenses within months, and the gate’s safety system interprets the clouded lens as an obstruction, triggering a reverse. We clean the lens, realign both eyes, and reseal the housing. If the lens is deeply pitted, we replace the sensor for $90 – $180. Call (866) 665-5592 and we’ll check it on site.
Heavy rainy-season downpours in Andover saturate the soil around gate post footings, causing the posts to shift slightly. That shift knocks the gate out of alignment with the rack and pinion, and the opener strains against the resistance. We re-seat the posts, realign the gate, and reset the opener’s force limits so it runs freely again. Expect to pay $240 – $400 for this repair, depending on how far the footing moved.
Yes. Andover’s 33023 homes are full of older manual gates that got retrofitted with LiftMaster or FAAC operators years ago, and those retrofits are some of our most common repairs. The challenge isn’t the operator brand; it’s the gate itself: hinge sag, post movement, and missing safety edges. We work on the gate and the opener together so the repair lasts. Call (866) 665-5592 to schedule a diagnostic.
Post-footing settlement from storm-season soil movement and decades of hinge wear on mid-century ranch gates. In Andover, the soil under many homes is compacted fill that shifts when saturated, and a 40-year-old gate post wasn’t set deep enough to hold up to that movement. We correct the sag by resetting the post and replacing worn hinge hardware, then recalibrate the opener to match the gate’s true weight.
Yes. Many Andover homes have driveways or yard gates far from the house’s electrical panel, and running conduit across a big lot gets expensive. We install solar-capable operators from Mighty Mule, LiftMaster, and Ghost Controls for Andover properties that don’t have nearby power. A solar opener installation typically runs $850 – $1,500 depending on the gate weight and panel size. Call (866) 665-5592 and we’ll assess your gate and sun exposure.
Call Carter Gate Repair for Electric Gate Repair in Andover
If your Andover gate won’t open, won’t close, or sounds like it’s grinding itself to pieces, call (866) 665-5592 for a free estimate. We work on the gate you have, diagnose the real problem, and quote the price before any work begins. From the control board to the hinge, we’ll get your gate back on track without replacing what doesn’t need replacing.
On a 1970s ranch home off Pembroke Road in Andover, we diagnosed a LiftMaster gate operator that would reverse randomly. The root cause was a corroded safety photocell lens clouded by salt-air film. After cleaning the lens and replacing the photo-eye, we also performed sag correction on the hinge post, which had shifted from storm-season soil movement. The swing gate now runs silently and latches securely through the rainy season. That’s the kind of fix we do all over this neighborhood.
Written by Mitch Delvecchio, Owner at Carter Gate Repair, serving Andover and the 33023 ZIP.