Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Scott Lake, FL | Carter Gate Repair
If your Ghost Controls gate opener is stalling, reversing mid-cycle, or draining its battery overnight in Scott Lake, the fix usually comes down to two things: corrosion at the low-voltage connections and a gate that’s drifted out of plumb from canal moisture and storm winds. We’re Carter Gate Repair, and we handle Ghost Controls swing and slide systems across Scott Lake (33056) as an independent service provider, not a manufacturer dealer. That means we diagnose what’s actually wrong and repair it on its merits. Call (866) 665-5592 for a free estimate, and we’ll tell you plainly whether your board, arm, or battery is worth saving.
Why Scott Lake Residents Choose Us for Ghost Controls Service
We work on Ghost Controls solar and low-voltage operators every week, from AXS and TSS systems on single swing gates to slide units on tight Scott Lake driveways. That repetition matters. When a TSS1 starts stalling after a wet week, we don’t guess at the cause; we go straight for the charge controller terminals and the battery bay, because we’ve seen the same failure on canal-side lots off the Scott Lake waterfront. The team is led by Mitch Delvecchio, who grew up off Sheridan Street in Hollywood and has spent the better part of two decades focused exclusively on gate systems across Broward County. If it swings, slides, or rolls, there’s a reason it stopped, and it’s usually not the reason you think.
We’re gate specialists, not generalists. Our entire trade is gates. We stock Ghost Controls OEM-compatible control boards, tube arms, batteries, and solar charge components, so we’re not waiting on a parts truck from a warehouse three states away when your Scott Lake driveway gate is stuck halfway open. And because we’re independent, we don’t have a brand to push. We work on the gate you have.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Scott Lake
- Solar panel and battery-bay corrosion. Ghost Controls low-voltage kits are sealed, but canal humidity and heavy afternoon rains in Scott Lake still creep into charge controller terminals. The gate stalls halfway through its cycle after a wet week. We clean and reseal the connections, then test the battery under load to see if it’s still holding a charge.
- Control-board and arm-mount loosening. The tube arms and mounting brackets on AXS and TSS swing kits vibrate loose on aging aluminum and steel posts, which throws the operator off its open/close limit positions. On 1970s-era Scott Lake ranch homes with original posts, this is one of the most common calls we get.
- Limit-switch and encoder drift after storms. Hurricane-season wind loads push the gate past its normal travel. The operator reverses or stops mid-cycle and won’t relearn its limits until the gate is realigned and the controls reprogrammed. Post-storm realignment is recurring work in Scott Lake.
- Keypad and remote receiver failures from salt air. The front-of-house enclosure takes the brunt of canal moisture. Keypads work intermittently, remotes stop pairing. We clean or replace the receiver and repopulate the remote codes, then check the keypad contacts before recommending a replacement.
- Battery backup failure on slide operators. The SLIDE series low-voltage units rely on battery power for consistent operation. When the battery struggles to hold a charge in South Florida heat, the gate slows, then quits. We test the battery under load and replace it only when it’s actually failed; we don’t sell parts you don’t need.
Ghost Controls Service in Scott Lake: What Local Conditions Mean for Your Equipment
Scott Lake’s gates sit on canal- and lake-front lots, and the swales and drainage easements behind those properties create a constraint most outsiders don’t account for: you can’t simply move a gate post further back when a Ghost Controls arm pushes it out of plumb. The post has to stay within the legal footprint. So when an AXS1 operator starts dragging a gate through its travel because the post has leaned from saturated soil, the fix is realignment and re-anchoring, not relocation. We’ve done this on canal-side lots off the Scott Lake waterfront where the original post was set decades ago and the swale behind it is untouchable. That’s the difference between a technician who knows Scott Lake and one who just knows gates. The two go together here.
Ghost Controls Models & Products We Service in Scott Lake
We service the full residential Ghost Controls lineup in Scott Lake: the TSS1 single swing gate operator in both solar and low-voltage kits, the AXS1 and AXS2 dual swing gate operator kits, the TDS2 dual swing opener with tube arms, and the SLIDE series low-voltage slide gate operator. Our parts approach is straightforward: OEM-compatible control boards, tube arms, batteries, and solar charge components, matched to your exact operator so the limits and safety reverse stay calibrated. On older kits we repair when the board and motor are sound and only the arm, battery, or wiring failed. We recommend replacement only when the operator housing or motor itself is corroded through, and we’ll show you the part before deciding. For broader Ghost Controls coverage, see our Ghost Controls sales & service page.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Scott Lake
Ghost Controls gate repair in Scott Lake typically runs between $180 and $400, depending on what failed. A loose arm bracket or corroded charge terminal is on the lower end. A failed control board or motor runs higher. Battery replacement for a TSS1 or SLIDE unit adds parts on top of labor. We quote the price and get your agreement before any work starts; no invoice surprises after the fact. A free estimate includes the diagnostic, a straight answer on whether the part is worth repairing, and a written quote. Call (866) 665-5592 and we’ll put a number on it before we touch a screw.
Serving Scott Lake, FL — Our Local Coverage Area
We’re based in the Scott Lake area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Scott Lake
No, we’re an independent Ghost Controls service provider. We diagnose and fix Ghost Controls equipment on its merits, not as a dealer, and we tell owners plainly when a board, arm, or battery is worth saving versus when replacement is the honest call. That independence means we never steer you toward a brand we’d rather sell.
We stock Ghost Controls OEM-compatible control boards, tube arms, batteries, and solar charge components, and we match them to your exact operator so the limits and safety reverse stay calibrated. When a part is available from the OEM, we use it. When an aftermarket part is the better value and meets spec, we tell you that too, before any work starts.
Most repairs we complete in a single visit, usually within an hour or two depending on what failed. A corroded charge terminal or loose arm bracket is quick. A failed control board takes longer because we verify the limits and safety reverse after installation. We carry common parts for the TSS1, AXS, TDS2, and SLIDE series, so we’re not waiting on shipping.
We service the TSS1 single swing gate operator, the AXS1 and AXS2 dual swing kits, the TDS2 dual swing opener with tube arms, and the SLIDE series low-voltage slide gate operator. If you’re not sure which model you have, call (866) 665-5592 and we can walk you through finding the label on the operator housing.
Ghost Controls gate repair in Scott Lake generally falls between $180 and $400 depending on the failure. Loose arm brackets and corroded terminals sit on the low end; a failed control board or motor sits on the high end. Every job is quoted and agreed before any work starts. Call (866) 665-5592 for a free estimate, and we’ll give you a number that covers parts and labor.
Service Areas Near Scott Lake
We also provide Ghost Controls service to homeowners and property managers in Scott Lake service area and neighboring communities including Hollywood, Hallandale Beach, West Hollywood, Pembroke Park, Dania Beach, and Carver Ranches. If your Ghost Controls gate is a few minutes outside Scott Lake, there’s a good chance we already have a technician nearby. See Ghost Controls service in Broadview Park and Ghost Controls service in Golden Glades for coverage details.
Book Your Ghost Controls Service in Scott Lake Today
If your Ghost Controls gate is stalling, reversing, or refusing to open after last night’s rain, call us. We’ll schedule a service call, diagnose the problem, and give you a written quote before any work begins. Call (866) 665-5592 for a free estimate.
Written by Mitch Delvecchio, Owner at Carter Gate Repair, serving Scott Lake and greater Broward County.