Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Andover, FL
Gate installation in Andover usually costs between $1,800 and $7,500 depending on whether we’re hanging a manual driveway swing gate or automating a sliding gate with a new operator, safety edges, and a keypad. Most homes here were built between the 1950s and 1980s, so the work tends to involve replacing rusted metal gates on concrete slabs rather than building elaborate estate entrances. Carter Gate Repair has served Andover since 2015, and we work on the gate you have rather than the brand we’d prefer to sell. Call (866) 665-5592 for a free estimate and a written price before any work starts.
Why Andover Homes Are Different
Andover is a small, unincorporated Miramar-adjacent community in ZIP 33023 where most properties are modest single-family ranch homes and small duplexes with fenced yards and driveways. There aren’t many HOA-governed subdivisions here, so homeowners make their own calls about gate styles, materials, and timing. That’s a real difference from places like Miramar or West Park, where deed restrictions can dictate what a gate can look like and how tall it can be.
What we see in Andover week to week is aging manual swing and slide gates on older residential lots, not the ornamental estate gates or commercial access-control systems common in wealthier South Florida enclaves. The housing stock runs mid-century to 1980s, which means a lot of original hardware has been through four or five decades of heat and rain.
South Florida’s humid subtropical climate does the damage. Intense summer sun breaks down powder coating and paint. Heavy rainy-season downpours pool water at hinge points and post bases. Salt-laden air from nearby coastal Broward accelerates rust on exposed steel and iron. Hurricane-season prep becomes a recurring late-summer pattern: a gate that swung fine in May is binding, sagging, or failing to latch by September. Andover homeowners don’t need decorative upgrades as often as they need a gate that still swings freely and latches securely after storm-season warping and rust.
Styles & brands we work with
Our Main Andover Services
Two services dominate the calls we get from Andover: gate repair for the older manual gates that make up most of the housing stock here, and electric gate repair for automated operators that salt air and humidity have compromised.
Gate Repair in Andover
Gate repair in Andover usually means a sagging swing gate with a post that’s shifted in sandy soil, or a slide gate whose rollers have ground through years of rain and rust. Hurricanes and afternoon storms warp metal, loosen hinge bolts, and crack wood gates along the grain. We rebuild hinges, reset and brace posts, straighten frames, and replace rollers and tracks without selling you a new gate unless the old one is actually beyond saving. When a weld breaks or a latch stops catching, the fix is usually faster and cheaper than people expect. Link: Gate Repair in Andover.
Electric Gate Repair in Andover
Electric gate repair in Andover covers everything from a keypad that stopped accepting codes to an operator that hums but won’t move the gate. Salt air corrodes low-voltage connections. Lightning from summer storms takes out control boards. Loop detectors fail and safety edges crack in the sun. Carter’s technicians have hands-on experience with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we diagnose the system you own instead of pushing a brand we’d rather sell. Link: Electric Gate Repair in Andover.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Andover
Gate installation in Andover is driven by two forces: the aging housing stock and the climate. Most original gates on 1960s and 1970s ranch homes have reached the end of their service life, with rusted frames, seized hardware, and posts that no longer hold. And the humidity, salt air, and hurricane-season abuse mean whatever goes in needs to be chosen for South Florida conditions, not for a dry climate. We install gates that fit Andover’s modest lots and low-rise, car-dependent neighborhoods, and we quote the full price before any work begins. For more on what a new gate involves, see our Gate Installation guide.
Driveway Gate Installation
Signs you need it
Your current gate drags across the driveway, won’t latch, or the post is leaning far enough that the gate no longer closes at all.
What it costs in Andover
Driveway gate installation in Andover typically runs $2,200 to $5,800 for a single swing gate with new posts and hardware, and $4,200 to $8,700 for a sliding driveway gate.
How we do it
We remove the old gate and posts if needed, set new posts in concrete, hang and align the new gate, and test the swing or slide through a full open-close cycle before we leave.
Automatic Gate Installation
Signs you need it
You want vehicle access from the driver’s seat, a secure perimeter without getting out to open a manual gate, or controlled access for a rental or duplex property.
What it costs in Andover
Automatic gate installation in Andover typically costs $2,800 to $7,200 for a single swing gate with operator, and $6,000 to $12,000 for a dual swing or sliding gate with full automation.
How we do it
We mount the operator, run low-voltage power and safety-edge wiring, install loop detectors or vehicle sensors where needed, program remotes and keypads, and test all safety functions repeatedly.
Sliding Gate Installation
Signs you need it
Your lot slopes toward the driveway, you have limited swing clearance, or a previous swing gate kept sagging into the drive path.
What it costs in Andover
Sliding gate installation in Andover typically runs $2,500 to $6,500 for a manual slide gate with track, and $4,200 to $9,000 automated.
How we do it
We set the track system, build or anchor the gate frame, hang the gate with proper clearance, and if automated, wire the operator and sensors through a full test pass.
What Gate Installation Costs in Andover
| Item | Typical range in Andover |
|---|---|
| Manual driveway swing gate with new posts | $2,200 – $5,800 |
| Sliding gate with track, manual | $2,500 – $6,500 |
| Automated single swing gate with operator | $2,800 – $7,200 |
Prices depend on gate length, material, whether the old posts and slab can be reused, and how much electrical work the automation needs. You’ll get a written estimate before we start, and the number on the estimate is the number you pay.
Do you handle the full automatic gate installation including power and sensors?
Yes. We run the low-voltage wiring, mount the operator, install safety edges and loop detectors where required, and program every remote and keypad. You don’t need to coordinate a second tradesperson. Call (866) 665-5592 for a quote on your Andover property.
How long does gate installation take in Andover?
Most single driveway gate installations in Andover are finished in one day once materials are on site. Sliding gates and full automation can take two days. We schedule the install after the gate and operator arrive, so there’s no gap where your driveway is open.
Brands We Service in Andover
We service and install LiftMaster, FAAC, Ghost Controls, and Mighty Mule among the nine gate-system brands our technicians know cold. For Andover jobs we stock common boards, remotes, safety edges, and rollers locally, which keeps most repairs to a single visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Andover, FL
| Service | Typical range in Andover |
|---|---|
| Gate repair (hinge, latch, or post reset) | $180 – $750 |
| Electric gate repair (board, sensor, or wiring) | $220 – $1,300 |
| Gate opener installation | $850 – $3,500 |
| Gate hinge replacement | $150 – $600 |
| Gate wheel or roller replacement | $120 – $450 |
| Gate operator repair | $220 – $1,200 |
| Gate post repair or reinforcement | $200 – $700 |
| Gate latch or lock replacement | $90 – $350 |
| Automatic gate safety sensor replacement | $200 – $650 |
| Manual driveway swing gate with new posts | $2,200 – $5,800 |
| Sliding gate with track, manual | $2,500 – $6,500 |
| Automated single swing gate with operator | $2,800 – $7,200 |
In Andover, rust and salt corrosion push repair costs toward the higher end when hardware has to be cut off rather than unbolted, and when posts need to be dug out and re-set in fresh concrete. The price we quote is the price you pay, agreed before work starts, with no surprise line items at the end.
Neighborhoods We Serve in Andover
We cover the full 33023 ZIP and the residential streets around it, including the older ranch-home blocks closest to Miramar Parkway and the smaller duplex-lined streets that make up much of Andover’s housing stock. Most of the area is reachable within 30 to 45 minutes from our Hollywood base.
- Miramar Parkway corridor
- SW 33rd Street area
- SW 25th Street blocks
- Ranch-home streets north of County Line Road
- SW 40th Avenue neighborhoods
Service Area – Cities Near Andover
Besides Andover, Carter Gate Repair serves the surrounding southwest Broward communities. We handle gate repair and installation in Carver Ranches, FL, Miramar, FL, West Park, FL, and Hollywood, FL. If your property sits close to a city line, call and we’ll confirm coverage for your street.
Serving Andover, FL — Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Andover
Most Andover calls get a technician out within one to two business days, and many repairs are finished the same visit because we stock common parts. We’ll always give you a window before we dispatch, not an open-ended “sometime today” promise.
Because Andover is unincorporated, gate projects generally fall under Broward County rules rather than a city permitting office. Most residential gate repairs and like-for-like replacements don’t need a permit. New automated gates sometimes require electrical sign-off, and we’ll tell you upfront if your job does.
Yes. We’re brand-agnostic by design. Whether the gate came from a fencing company, a garage door company, or a previous owner, we diagnose what’s there and repair it without pushing a replacement unless the gate truly needs one. Call (866) 665-5592 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Andover Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Erin Schaefer"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jodi Fletcher"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Javier Delgado